Models And Contents Of The Package; Operating Instructions; Product Description; Technical Data - Dea OLI 600 Notice D'emploi

WARNING Awareness of the operation of the OLI 600 key-
release mechanism (see F4 Page 30) is essential for all users
of the automatism because the failure to use the device qui-
ckly during emergencies can jeopardise people, animals and
property. Enclosure I to these instructions, which the installer
is required to deliver to the final user, illustrates operation and
can be detached.
3 MODELS AND CONTENTS
OF THE PACKAGE
The name OLI 600 identifies a series of hydraulic gate ope-
rators with different features depending on dimension (stroke),
speed, reversibility, and blocks.
The DEA System articles in the series are:
No. of blocks/
Article
revers.
602 1 (closing)
603 2
604 reversible
605 2
606 reversible
602L 1 (closing)
603L 2
604L reversible
605L 2
606L reversible
The OLI 600 gate operator is completed by the set of optio-
nal accessories below:
Article
0/652
0/653
0/351
600 H
Inspect the "Contents of the Package" on Page 30 and
compare it with your product for useful consultation during
assembly.

4 OPERATING INSTRUCTIONS

In compliance with Directive 2006/42/CE Enclosure I, Point
1.7.4.

4.1 Product description

The OLI 600 hydraulic operator for swing gate automation
Operating instructions and warnings
A10
stroke speed
270 fast
270 fast
270 fast
400 fast
400 fast
270 slow
270 slow
270 slow
400 slow
400 slow
Description
Fastening supports with
welded plate
Standard fastening
supports
Plate 100x60
Hydraulic oil: 1 liter
is composed essentially by a pump in an oil bath that drives a
cylinder. The pump is driven by a single-phase electric motor
(see F1, Page 30).
4.2

Technical data

Single-phase power supply
Absorbed power
Max. pressure
Rated operating pressure
Work cycle
Thrust force at 20 Bar
Traction force at 20 Bar
Max. stroke
Max. distance between
attachments
Weight of product filled with oil
OLI 602, 603, 604
OLI 605, 606
Type of oil MOBIL
Quantity of oil
OLI 602, 603, 604
OLI 605, 606
Operating temperature range
Degree of protection
Overall dimensions
4.3

Labelling information

Part of the summarised data for the CE label are listed in the
label applied to the product (see Position F6, Page 32); the data
regarding the seller are found in the enclosed Warranty, while
"Indispensable Operating Safety Elements" are found under
Point "4.2 Technical data".
4.4

Suitable conditions of use

The OLI 600 is designed for installation in residential and
industrial swing gates as an actuator for the operational auto-
mation as shown in F3 on Page 31 and features attachments
for its use on supports in masonry or metal structural works and
various types of gates (see the optional accessories table on
Page 8).
The OLI 600 has been designed and tested for operation un-
der "normal" residential and industrial gate opening conditions;
temperature limits, degrees of protection against dust and water,
and other data are provided in Point 4.2 "Technical Data".
Satisfactory operation requires the correct positioning of the
OLI 600 operator with respect to the gate; we provide the DEA
System recommended measurements in F3, Page 31.
A
Article α
mm
602 90° 130
603 90° 130
604 90° 130
605 90° 200
605 120° 150
606 90° 200
606 120° 150
The operator required must be selected according to the
gate to be automated; the attrition on the attachments, the wei-
ght, the length/height of the gate leaf and the degree of closing
of the surfaces are the elements to be considered. We provide a
chart representing typical situations that correlates the length of
the gate leaf with its weight.
O L I 6 0 0
230 V ±10% 50 Hz
170 Watt
40 bar
20 bar
intensive
3200 N
2600 N
270 / 400 mm
1000 mm
11,4 Kg
13,0 Kg
DTE 11 M
1,75 lt
2 lt
-15°C ÷ 70 °C
IP 55
see F2 on page 31
B C D E
mm mm mm mm
130 270 1000 110
130 270 1000 110
130 270 1000 110
190 400 1260 90
190 400 1260 90
190 400 1260 90
190 400 1260 90
9