Sony CDX-CA900 Mode D'emploi page 20

RM-X4S (optional)
First, attach the appropriate label depending on
how you want to mount the rotary commander.
The rotary commander works by pressing
buttons and/or rotating controls.
S O U N D
M O D E
D S P L
By pressing buttons
(SOUND)
(SOURCE)
Rotate the VOL control
to adjust the volume.
Press
(SOURCE)
(MODE)
(ATT)
(OFF)*
3
(SOUND)
(DSPL)
20
D S P L
M O D E
S O U N D
(ATT)
(MODE)
(DSPL)
(OFF)
To
Change source
(radio/CD/MD* 1 /AUX*
Power on
Change operation
(radio band/CD unit/MD*
unit)
Attenuate sound
Stop playback or radio
reception/Power off
Adjust the sound menu
Change the display item*
By rotating the control
Rotate and release to:
– Skip tracks.
– Tune in stations automatically.
Rotate, hold, and release to:
– Fast-forward/reverse a track.
– Find a station manually.
By pushing in and rotating the control
Push in and rotate the control to:
2 )/ – Receive preset stations.
– Change the disc.*
During playback of a CD containing MP3
1
Files* 5
Push in and repeat rotating quickly to:
– Change discs one by one.
Push in, then rotate and hold to:
– Change albums.
*1 Only if the corresponding optional equipment is
connected.
*2 Available only when an optional Sony portable
4
device connected to BUS AUDIO IN of the unit. You
cannot connect any optional CD/MD units at the
same time.
*3 If your car has no ACC (accessory) position on the
ignition key switch, be sure to press (OFF) for
2 seconds to turn off the clock indication after
turning off the ignition.
*4 When using the RDS function, you can press
(DSPL) to show "PTY" in the display.Then you can
only use your master unit or card remote
commander to receive the PTY data.
*5 Available only when optional CD unit with the MP3
file control function is connected, and an MP3 file is
played.
SEEK/AMS
control
PRESET/DISC
control
1