Transport To Workplace; Operating The Nordforest Titan 80 Mechanical Felling Wedge; Examining The Tree; Cut Back Root Buttresses - NORDFOREST Titan 80 Mode D'emploi

Transport to workplace

44 Nordforest Mechanical Titan 80 Felling Wedge
Transport to workplace
The Nordforest Titan 80 Mechanical Felling Wedge is very easily
transported to the workplace.
›
Carry the Nordforest Titan 80 Mechanical Felling Wedge by the hand
grip or hang the Nordforest Titan 80 Mechanical Felling Wedge by
the hand grip from your belt.
›
Use the Nordforest carrying case no. 20-076-27.
Operating the Nordforest Titan 80
Mechanical Felling Wedge

Examining the tree

Before using the Nordforest Titan 80 Mechanical Felling Wedge, you
must examine the tree to be felled.
›
In so doing, note the following factors that influence the felling:
• inclination and height of tree,
• natural overhang,
• form and condition of branches (dry or loose branches),
• wind direction and wind strength,
• obstacles in the vicinity such as buildings, paths, power lines.
›
Where possible, fell the tree in its natural fall direction.

Cut back root buttresses

›
Cut back thick root buttresses to ensure efficient felling.
20-076 | 03.2017