Bosch Intuvia BUI251 Notice D'utilisation D'origine page 17

Code Cause
602 Internal battery fault
603 Internal battery fault
605 Battery temperature error
606 External battery fault
610 Battery voltage fault
620 Charger fault
640 Internal battery fault
655 Multiple battery faults
656 Software version error
7xx Gearbox fault
Display is Internal fault in the on-board com-
blank puter
Bosch eBike Systems
Corrective measures
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
The battery is outside the tolerable temperature range.
Switch the eBike system off to let the battery cool down or
warm up to the tolerable temperature range. Restart the
system. If the problem persists, contact your Bosch eBike
dealer.
Check the wiring. Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Replace the charger. Contact your Bosch eBike dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Switch the eBike system off. Take the battery out and put it
back in. Restart the system. If the problem persists, con-
tact your Bosch eBike dealer.
Contact your Bosch eBike dealer and ask them to update
the software.
Please read the operating manual provided by the gearbox
manufacturer.
Switch your eBike system off and on again to restart.
English – ​ 1 5
1 270 U20 XBI | (28.02.2019)