Assembly - Atag WO6011MR Mode D'emploi

INSTALLATION

Assembly

min.
100
EN 12
Integration in cupboard without shelf
• Using 4 screws, fit the attachment brackets to the walls of the
upper kitchen cupboard at a height of 135 mm.
• A free space of 100 mm should be retained above the attachment
brackets for the final fitting of the cooker hood.
Integration in cupboard with shelf
• Using 4 screws, fit the attachment brackets to the walls at a height
of 135 mm.
• A free space of 100 mm should be retained underneath the shelf for
the final fitting of the cooker hood.
• Slide the cooker hood into the cupboard and fit this with four
screws to the attachment brackets.
Or:
• Slide the cooker hood into the cupboard and fit this with four
screws underneath the shelf.
• Connect the exhaust outlet to the flange and then to the connection
of the exhaust rack.
• Put the plug into the disconnected wall socket n then turn on the
power.