Grease Filters; Carbon Filter; Lights - Atag WO6011MR Mode D'emploi

MAINTENANCE

Grease filters

Carbon filter

Lights

Remove grease filters
Switch off the mains power! Remove the plug from the socket or turn
off the switch in the fuse box. Press the lock and tilt the grease filter
downwards.
Replace carbon filter
1. Remove the grease filter furthest to the back.
2. Insert the carbon filters.
3. Insert the grease filters.
Important:
• The saturation of the filter depends on the intensity of use, cooking
method and frequency with which the grease filters are cleaned.
• The carbon filter should be cleaned once every six months
using a neutral cleaning agent. Clean the filter by hand or at low
temperature in the dishwasher. If cleaning it in the dishwasher, do
not place any other dishes in the appliance. Allow the carbon filter
to dry before you replace it in the cooker hood. You can speed up
the drying process by placing the filter in the oven for 10 minutes
at no more than 100 degrees Celsius. Saturated carbon is not
environmentally-friendly, so do clean the filter in time.
Replacing lights
• Remove the screw in the cover of the light and then the cover itself.
• Replace the LED lamp with a new LED lamp up to max 4 Watt with
E14 fitting.
• Put the cover back.
EN 9