Maintenance; Cleaning - Atag WO6011MR Mode D'emploi

MAINTENANCE

Cleaning

EN 8
Attention! For all maintenance switch off the mains power first by
pulling the plug out of the socket or by turning off the home's master
switch. The hood needs to be cleaned regularly, both inside as well as
outside (at least in the same frequency as the grease filter cleaning). Do
not use abrasive cleaners. Do not use alcohol!
Attention! If the instructions regarding cleaning the appliance or
replacing the filters are not followed, this can cause a fire. These
instructions need to be observed! The manufacturer is not liable for
damage to the motor or fire damage resulting from incompetent
maintenance or from non-adherence to the above safety instructions.
Cooker hood
Clean the cooker hood with soapy water and a soft cloth. Then wash
off with clean water. Do not use aggressive cleaning agents such as
caustic soda. The cooker hood finish stays in good condition if it is
buffed periodically following the application of wax.
Stainless steel cooker hoods
Do not use scouring pads or other abrasive cleaners on stainless steel
cooker hoods. Finish with a non-abrasive, non-polishing agent and buff
with the structure of the stainless steel.
Metal grease filters
Metal grease filters should be cleaned once a month using a neutral
cleaning agent, either by hand or in the dishwasher on a short, low-
temperature programme. Place the grease filters with the openings
facing downwards in the dishwasher so the water can run out of the
filter. Aluminium grease filters become dull as a result of cleaning agents
or the dishwasher. This is normal and does not effect the working.