5.
Make sure that the rear plate of the appliance is placed close to the wall.
NOTICE Do not cover or block any openings. Do not remove feet.
6.
Connect the appliance to a suitable, properly installed, earthed and easily
accessible mains power socket. Make sure the appliance can be disconnected
from the mains at all times. WARNING! It is recommended to connect the
appliance to a separate circuit serving only the appliance. Connecting several
high voltage devices to one circuit may overload the electricity network and
result in a fire or other accidents or damages. When the appliance is first
plugged in, you will hear a beep. The display will show
to set the time to set the time on the appliance.
7.
Make sure that the power supply cord does not run under the oven or over any
hot or sharp surfaces.
48 |
VESTEL VFM820EW
and "1:00". See How