Installation Instructions - Continua SQ4 Suspended LED
Wiring Table
OLD
Power Supply (Input)
NEW
Power Supply (Input)
Please note: The grey dimming wire will be changed to a pink wire in 2022.
Recommended Equipment:
• Hammer
• 1/4" nut driver
• Flathead screwdriver
• Scissors or sharp cutting blade
• Gloves
Optional Baffle and Lens
Baffle is shipped pre-installed in light fixture. Do not
remove baffle tape until installation is complete.
2
Cooper Lighting Solutions
Black (BK) - Hot
White (WT) - Neutral
Violet (VT) - Dimming (+)
Gray (GY) - Dimming (-)
Black (BK) - Hot
White (WT) - Neutral
Violet (VT) - Dimming (+)
Pink (PK) - Dimming (-)
Baffle Tape
Installation instructions
Power Supply (Input) - When Applicable
Vivid Tune
A
B
Biscuit Aligner
D
E
Cross Cable
G
Bushing
Black/Red (BK/RD) - Emergency Hot
White/Red (WT/RD) - Emergency Neutral
White/Orange (WT/OR) - 2nd Circuit Neutral
Orange (OR) - 2nd Circuit Dimming (+)
Yellow (YL) - 2nd Circuit Dimming (-)
Blue (BL) - Battery/Emergency Unswitched Hot
Violet/White (VT/WT) - 1st Circuit CCT (+)
Gray/Black (GY/BK) - 1st Circuit CCT (-)
Black/White (BK/WT) - 2nd Circuit CCT (+)
White/Yellow - 2nd Circuit CCT (-)
C
#8-18 x 5/8 HWH
Cast joiner
F
Cable Adjuster
Strain Relief