Introduction; Intended Use; Scope Of Delivery; Description Of Parts - ULTIMATE SPEED UOP 12 C1 Instructions D'utilisation Et Consignes De Sécurité

OIL PUMP 12 V UOP 12 C1
˜ Introduction
We congratulate you on the purchase of your
new product . You have chosen a high quality
product . The instructions for use are part of the
product . They contain important information
concerning safety, use and disposal . Before using
the product, please familiarise yourself with all
of the safety information and instructions for use .
Only use the product as described and for the
specified applications . If you pass the product on
to anyone else, please ensure that you also pass
on all the documentation with it .
˜ Intended use
This appliance is intended to pump out engine oil,
diesel fuel or heating oil . It is intended for private
use only .
The appliance shall not be used for pumping out
flammable liquids like gasoline and petroleum,
transmission oil or water . Pumping out chemicals,
alkalis, foods, paints and varnishes is also not
allowed .
The appliance is not suitable for continuous
operation . It can be continuously operated for
maximum 30 minutes .
Any other use not mentioned in these instructions
may cause a damage to the appliance or
generate a serious risk of injury .
The user is solely responsible for damage or
accidents to other people or their property,
which may occur while using the appliance . The
manufacturer accepts no liability for damages
caused by improper use .
6 GB/IE/NI
˜ Scope of delivery
After unpacking the appliance, check if it is
complete and if all parts are in good condition .
Remove all packing materials before use .
Oil pump with a battery connection cable
Suction hose
Drain hose
2 hose clamps
Operating manual
˜ Description of parts

Appliance

1 On/off switch
2 Pump casing
3 Battery connecting cable
4 Positive pole clamp (+) (red)
5 Negative pole clamp (‒) (black)
6 Drain hose connector (OUT)
7 Protective caps
8 Suction hose connector (IN)

Accessories

9 Suction hose (Ø 6 mm)
Hose clamp
10
Drain hose (Ø 12 mm)
11
˜ Technical data
Model number
Input voltage
Power input
Max . running time max
t
Max . temperature max
ϑ
Protection class
IP rating
Output (pump capacity)*:
diesel fuel / heating oil
engine oil (60 °C)
Max . discharge head
Max . permissible pressure
Weight (incl . accessories)
Sound pressure level
* The capacity may diverge from given data,
depending on the temperature and type of oil .
UOP 12 C1
12 V
(direct current)
60 W
30 min
60 °C
III/
IPX4
approx . 1 .5 l/min
approx . 0 .2 l/min
0 .7 m
0 .3 MPa / 3 bar
approx . 890 g
approx . 70 dB(A)