Lenze 8200 motec Instructions De Montage page 119

Code
No. Name
C0002 Transferring
* parameter
s
sets with the
keypad
uSEr
(Contin
uation)
EDK82MV371 DE/EN/FR 7.0
Possible settings
Lenze Selection
Keypad ð PAR1 (+ FPAR1)
71 with function module application I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
11 with all other function modules
Keypad ð PAR2 (+ FPAR1)
72 with function module application I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
12 with all other function modules
Keypad ð PAR3 (+ FPAR1)
73 with function module application I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
13 with all other function modules
Keypad ð PAR4 (+ FPAR1)
74 with function module application I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
14 with all other function modules
Controller ð keypad
80 with function module application I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
20 with all other function modules
Keypad ð function module
40 only with function module INTERBUS,
PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
Function module ð keypad
50 only with function module INTERBUS,
PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
l
Commissioning
Important controller codes
IMPORTANT
Overwrite selected
parameter set and, if
required FPAR1, with the
corresponding data of
the keypad
Copy all available
parameter sets
(PAR1 ... PAR4, if required
FPAR1) into the keypad
Only overwrite the
module−specific
parameter set FPAR1
with the data of the
keypad
Only copy the
module−specific
parameter set FPAR1 into
the keypad
7
119