Extent Of Delivery - ATIKA BH 800 N Notice Originale


Keep the operating instructions in a safe place for
future use.

Pass the operating instructions on to all persons
who work with the machine.
You may not start to operate the
machine until you have read these
operating instructions, observed all
the instructions given and installed
the machine as described!
This machine must not be operated /
!
used by children, persons with restricted
physical, sensory or mental abilities or a
lack of experience and/or know-how or
by persons who are not familiar with the
instructions.
The unit must not be operated by
!
children or young people under 16 years
of age.
National and local regulations may
determine a different age restriction for
the user.
If the power cord (if available) of this
!
machine is damaged, it must be replaced
by a specific power cord that can be
purchased from the manufacturer or
customer service.

Extent of delivery


After unpacking, check the contents of the box
That it is complete

Check for possible transport damage


1 pre-assembled device unit

1 Lower handle hoop

1 Upper handle hoop

1 screw bag

1 operating instructions

1 assembly and operating instruction sheet

1 warranty declaration
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately.
Packaging material can be recycled and should be brought to
an eco-friendly recycling facility.
Contents
Extent of delivery
EC Declaration of Conformity
Symbols on the machine / original instructions
Operating times
Proper use
Residual risks
Vibrations
Safety instructions
Description of device / spare parts
Assembly
Start-up
Before start of work
Working with the tiller
Maintenance and cleaning
Transport
Storage
Possible faults
Technical data
Guarantee
EC Declaration of Conformity
No. (S-No.): 14266
according to EC directive: 2006/42/EC
We,
Altrad Lescha Atika GmbH
Josef-Drexler-Str. 8; 89331 Burgau - Germany
herewith declare under our sole responsibility that the product
Bodenhacke (Tiller) type / model BH 800 N
Serial number: 000001 - 020000
is conform with the above mentioned EC directive as well as with
the provisions of the guidelines below:
2014/30/EU, 2000/14/EC and 2011/65/EU.
Following harmonized standards have been applied:
EN 60335-1:2012+A11+A13:2017; EN 709:1997+A4;
EN 62233:2008; EN ISO 12100:2010;
EN 55014-1:2017; EN 55014-2:2015;
EN 61000-3-2:2014; EN 61000-3-3:2013
Conformity assessment procedure:
2000/14/EC - Appendix V.
Measured level of the acoustic output L
Guaranteed level of the acoustic output L
Keeping of technical documents at:
Altrad Lescha Atika GmbH - Technical department -
Josef-Drexler-Str. 8 - 89331 Burgau - Germany
i.A.
Burgau, 28.04.2020 i.A. G. Koppenstein,
89.03 dB (A)
WA
93 dB (A)
WA
Engineering design management
13
13
14
14
14
15
15
15
17
17
18
18
18
19
20
20
20
21
21
13