General Safety Instructions; Before Using The Machine - Kiva Atlas X2 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2. WORK SAFETY AND HEALTH
Riding mowers models AC92 and AC92 4x4 under the brand name CROSSJET are manufactured
according to valid European safety norms. The machine's manufacturer confirms this fact in the
Statement of compliance, which is included at the end of this user's manual (
If this machine is used properly and according to the user's manual, it is very safe.
In the event that work safety is not adhered to and all warnings in this manual are
not respected, this riding mower may cut off hands, legs or deflect objects and
so may cause serious injury or death to persons, damage or destructions of the
machine or one of its parts or accessories.
2.1 SAFETY INSTRUCTIONS
The person primarily responsible for their own safety and the safety of others during the operation
of the riding mower is its user. The manufacturer takes no responsibility for the injury of persons or
damage to the machine and ecological damage resulting from the machine not being used and operated
in accordance with all safety instructions included in this user's manual.

2.1.1 GENERAL SAFETY INSTRUCTIONS

! This machine may only be driven by a person over 18 years of age that has read this user's manual.
! The user of the machine is responsible for the safety of persons in the vicinity of the working area of
the machine.
! It is not permitted to perform any technical modifications to the machine and its accessories without
the manufacturer's written consent. Unauthorised modifications may lead to hazardous work safety
conditions and void the warranty.
! Adhere to all requirements relating to fire safety (
! Do not remove safety stickers or labels from the machine.
! Do not stay in the vicinity of the machine or under it, if it is lifted and is not sufficiently secured
against falling or tipping over in the lifted position.
! Always turn off the mowing deck and engine and take the key out of the ignition, when:
 you are cleaning the machine
 you are removing accumulated grass from the mowing deck
 you have driven over a foreign object and it is necessary to check whether the machine has been damaged
or it is necessary to remedy the damage
 the machine is vibrating with unusual force and it is necessary to identify the cause of the vibrations
 you are repairing the engine or other moving parts (also disconnect cables from the spark plugs)
2.1.2 CLOTHING AND PROTECTIVE AIDS OF THE DRIVER
! When operating the machine, always use appropriate work attire. Never wear loose clothing and short
pants.
! When operating the machine, always wear firm, closed footwear, ideally with non-slip soles. Never
operate the machine when wearing sandals or barefoot.
! Noise and vibration values at the location of the operator provided in this manual (
closely related to the requirements of directives EU 2003/10/ES (exposure to noise) and 2002/44/ES
(exposure to vibrations), that regulate the conditions for use of personal protective aids against noise
and vibrations and also the reduction of exposure time of the operator by means of appropriate
work breaks. The machine manufacturer recommends always using hearing protection when
operating the machine. Not adhering to these instructions may result in permanent health
damage!

2.1.3 BEFORE USING THE MACHINE

! Do not use the riding mower if it is damaged or if any of its protective elements are missing. All covers
and other protective elements must always be in their place. Therefore, do not remove or put out of
2.4).
143
10).
1.4) are

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Atlas x4

Table des Matières