Attachments; Filling The Boiler Tank During Use - ARIETE Multi Vapori MV 6.10 Instructions D'emploi

Extension nozzle ①
With this attachment it is possible to thoroughly clean all those surfaces where stubborn dirt can take hold.
The nozzle can be fitted directly to the gun nozzle (D) or extension tubes ⑧: after lining up the marks on the gun nozzle
(D) and attachment, turn the nozzle 90° clockwise until it locks into place (
Hood ②
This attachment can be fitted to the gun nozzle (D) to protect the end.
Round brush ③
This attachment is for fitting on the extension nozzle ① and helps to dissolve the most stubborn dirt build up, such as the
type that forms on the cook top or in the grout widths between tiles. It can be used to clean bathroom fixtures, sinks, cooker
racks, showers and baths, where it removes all traces of scale (
Angled nozzle ④
This attachment can be fitted to the gun nozzle (D) after inserting the cap ② or extension nozzle ①.
It is particularly useful for reaching and sterilising difficult areas, where dirt can build up unseen, on radiators, shutters, and
bathroom fixtures, removing it simply and quickly (
Upholstery brush ⑤
The fabric brush can be fitted straight onto the gun nozzle (D) or to the extension tubes ⑧. When the handy cloth ⑬ is
fitted, it is possible to use the brush to remove dust and for daily cleaning of sofas, armchairs, blankets, mattresses and
cushions ( ). The brush can also be used to freshen up fabrics, removing all creases. In any case, we recommend, when
7
using for the first time and during normal use, to discharge the condensation from the steam into a container so as not to
wet the fabrics ( ).
8
Window brush ⑥
The fabric brush ⑤ can be fitted with a window wiper: assembly the two attachment, placing the tabs at the base of the fab-
ric brush inside the hooks at the base of the window wiper. Use the window wiper to restore the polished shine to windows,
mirrors and gloss surfaces. It is also easy to use on shower cubicle glass, removing the problem of lime scale (
Floor brush ⑦
This accessory is used on extension tubes ⑧ and it has handy cloth grips that can hold, as well as the cloth provided ⑫,
any type of machine washable cloth. To fit the cloth, place the brush in the middle, lift the clips at the ends of the brush,
insert a flap of cloth and then release the clips (
Extension tubes ⑧
The extension tubes snap together and can be easily separated by pressing the release button. They are useful for reach-
ing high surfaces with the window wiper ⑥, using the special extension joint, or they can be used with the floor brush ⑦
( ).
11
Attachment bag ⑨
The appliance comes with a bag for the attachments, which is handy for storage as well as for keeping them close at hand
( ).
12

FILLING THE BOILER TANK DURING USE

If the boiler tank (L) should become empty during use, switch off the appliance, unplug it from the mains power and proceed
as follows:
• press the button (A) to discharge any remaining steam;
• slowly unscrew the boiler tank filler cap (M), waiting a few seconds for the steam to finish before unscrewing it com-
pletely. Wait a few minutes before adding water to the boiler tank (L);
• add more water, making sure to pour it in slowly to prevent new bursts of steam from forming.
We recommend waiting at least 3 minutes from the time of unplugging the appliance before adding more water
to the boiler tank;
• firmly screw the boiler tank filler cap (M) back into place;
• plug the appliance to the power mains;
• press the on switch (I).

ATTACHMENTS

).
5
).
6
).
10
- 17 -
I T
).
4
EN
).
9