Trotec BL 30 Notice D'emploi page 13

Contents
1 .Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 1
2 . Functions and specifications . . . . . . . . . . . . . . . B - 1
3 . Special features . . . . . . . . . . . . . . . . . . . . . . . . B - 2
4 . Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 3
5 . Software installation . . . . . . . . . . . . . . . . . . . . . B - 5
This publication replaces all previous versions . No part of this publication may be reproduced or processed,
copied or distributed via electronic means in any form whatsoever except with our written permission . We
reserve the right to make technical changes . All rights are reserved . Trademarks are used in the following
without any guarantee of their free usability and are basically as the manufacturer describes them . The
trademarks used are registered and should be treated as such . The right to make design alterations in
the interests of continuous product improvement and alterations to the shape or colour is reserved . The
package contents may differ from the product illustrations . This document has been prepared with the
appropriate care . We can accept no liability for any errors or omissions .© TROTEC®
1. Introduction
The temperature and humidity data logger is a particular-
ly sturdy, high-precision measuring instrument, which is
characterised by its fast response time . The data logger is
already used in many places to monitor both the ambient
temperature and the relative humidity and to collect mea-
ningful measurement data .
2. Functions and technical specifications
The data logger is a particularly efficient and handy measu-
ring instrument, which is particularly suitable for longer las-
ting measurement assignments . The measurement results
are stored in the data logger and transferred to the PC via
a USB cable . The data can subsequently be read out on the
PC . The display shows the current MAX, MIN, TIME, DATE,
temperature and humidity values .
m Moving the appliance from a cold to a warm
operating instructions - climate data logger Bl30
environment (and vice versa) can lead to the
formation of condensation on the measuring
circuitry of the appliance. This physical effect,
which cannot be prevented by structural me-
ans for any measuring instrument, leads to
false measurement values. Depending on the
temperature difference, the appliance requi-
res an ‚acclimatisation time' of approx. 15 - 30
minutes before the measuring procedure can
be resumed.
B - 1