LED display stand-alone
operation
with Bluetooth activated | Bluetooth deactivated
The control unit of the KHS HS2 hygiene flushing box
shows the following operating states :
Bluetooth activated
Status
LED red
Standby
---
Flashing
Flashing -
Connected
---
Error
Perm.
---
Flush
Warning
Flashing
Element
Status
On
1)
Buzzer
Off
<Test>
Press
button
the
button
1)
The buzzer can be suppressed with the <TEST> button.
LED display with external control
with Bluetooth activated | Bluetooth deactivated
Bluetooth activated
Status
LED red
LED green
D-flashing D-flashing D-flashing
Standby
---
Error
Perm.
---
Flush
Warning
Flashing
KEMPER KHS HS2
Bluetooth deactivated
LED green
LED red
LED green
D-flashing
Flashing
---
negative
---
D-Flashing -
negativ
Perm.
Perm.
D-flashing
D-flashing
---
Meaning
Error, diagnosis with
KEMPER HS2 app
Normal operation
Test solenoid valves
In case of
malfunction:
Suppress buzzer
Bluetooth deactivated
LED red
LED green
---
D-Flashing -
negativ
D-flashing
Perm.
Perm.
---
D-flashing
LED display CAN bus operation
with Bluetooth activated | Bluetooth deactivated
Bluetooth activated
Status
LED red
Standby
Error
Perm.
Flush
---
Warning
Flashing
---
---
Legend:
Perm.
Flashing
D-flashing
Flashing -
negative
D-Flashing -
negative
General error
To be able to acknowledge the error correctly
when Bluetooth is deactivated, the test button
must be pressed continuously for longer than
3s. If Bluetooth should be activated, the error
must be acknowledged using the Kemper HS2
app.
---
---
22
Bluetooth deactivated
LED green
LED red
Perm.
D-flashing
---
---
D-Flashing -
negativ
---
D-flashing
Flashing
---
D-flashing
LED permanently on
LED in flashing frequency
Double flashing
LED on - every second
with short interruptions
LED on - every second
with 2 short interruptions
For fault diagnosis and acknowledge-
ment of an error when Bluetooth is
activated, the KEMPER HS2 app must
be used.
Transmission
2.402 up to 2.485 GHz
frequency
Output power
4dBm (max)
EN
LED green
Perm.
---
Flashing
---