Instructions For The User - JMA BT SLIM Manuel D'utilisation

2. INSTRUCTIONS FOR THE USER

2.2.2. OPEN A GARAGE DOOR VIA THE CONVENTIONAL
SYSTEM
The following actions may be performed once an original remote
control has been copied onto the BT SLIM device (with the
device in Remote Control mode):
A) Hold the BT SLIM button for one second
to send the code saved on Button 1.
B) Press the BT SLIM button twice
to send the code saved on Button 2.
Note: Only two of the maximum four original remote controls that can be
saved onto the BT SLIM remote control can be used when the device is
in Conventional Remote Control Mode. When the device is set to Mobile
Mode, garage doors can be opened using all the original remote controls
saved to the device.
10