How To Pause The Program; Automatic Function; Automatic Switching-Off; Electrode Contact - Globus Duo Pro Manuel D'utilisation

How to pause the program

You can pause the program by pressing the PAUSE switch. Start the stimulation by pressing the PAUSE switch again.
The program continues where the stimulation was shut off.
Automatic functions

Automatic Switching-off

If the electric stimulator is not in use for more than 5 minutes and the intensity in both channels is on 0, the stimulator
automatically switches-off.

Electrode contact

If the electrodes are not correctly placed on the skin or the cables are not well connected, the intensity of channels is
automatically shut off to 0.
In case the electrodes are not correctly placed before starting a treatment, it is not possible to increase the channel
intensity.
This is a security measure to preserve the user from unpleasant possible effects.

Empty battery

The battery indicator lights up on the display when the batteries are almost empty. As long as stimulation feels the
same as usual you can continue the treatment. It is time to replace the batteries when stimulation starts diminishing or
the stimulator shuts off.

Memory function

The electric stimulator keeps on the memory the last performed program which is repurposed when you turn on the
stimulator again. The memory function takes back the unit to the first program every time you change the batteries.

Intensity of stimulation

The intensity value for obtaining a special contraction is completely subjective. It can depend on a series of factors like
as the electrode position, the adipose stratum, the perspiration etc. For these reasons the same current intensity value can
give different sensations from a person to another from a day to another or furthermore you could feel more contraction
on the left limb rather than the right one.
You have to regulate it on the bases of your sensations.

Special Functions

Keyboard lock key

When you have reached the wished intensity level, you can lock the keys except for the ON / OFF switch, by pressing
the LOCK key for 3 seconds. This function will avoid you the accidental use of switches during the treatment. The
keyboard lock is released when the key is pressed for three seconds again.
Note: You cannot change the intensity value during the rump up and ramp down in all intermittent programs, which
foresees cycles of work and recovery.
It is forbidden the reproduction and the copy of this manual without written permission of producer. REV. 10.10 Data di emissione 10_10_2010
25