Functional Description; Intended Use; Product Features; Technical Data - Bosch GWS 18 V-LI Professional Notice Originale

OBJ_BUCH-1102-002.book Page 27 Wednesday, November 4, 2009 3:23 PM
Use only original Bosch batteries with the
voltage listed on the nameplate of your
power tool. When using other batteries, e. g.
imitations, reconditioned batteries or other
brands, there is danger of injury as well as
property damage through exploding batter-
ies.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for cutting, roughing,
and brushing metal and stone materials without
using water.
For cutting metal, a special protection guard for
cutting (accessory) must be used.
For cutting stone, a special extraction hood for
cutting with cutting guide (accessory) must be
used.
With approved sanding tools, the machine can
be used for sanding with sanding discs.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Spindle lock button
2 On/Off switch
3 Allen key
4 Battery*
5 Battery unlocking button
6 Auxiliary handle (insulated gripping surface)
7 Grinder spindle
8 Locking screw for protection guard
9 Protection guard for grinding
10 Mounting flange with O-ring
Bosch Power Tools
11 Grinding disc*
12 Clamping nut
13 Quick-clamping nut
14 Carbide grinding head*
15 Protection guard for cutting*
16 Cutting disc*
17 Hand guard*
18 Rubber sanding plate*
19 Sanding sheet*
20 Round nut*
21 Cup brush*
22 Button for charge-control indicator*
23 Battery charge-control indicator*
24 Handle (insulated gripping surface)
25 Cutting guide with dust extraction
protection guard *
26 Diamond cutting disc*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.

Technical Data

Angle Grinder
Article number
Rated voltage
Rated speed
Grinding disc diameter,
max.
Thread of grinder
spindle
Thread length (max.)
of grinder spindle
Weight according
to EPTA-Procedure
01/2003
Please observe the article number on the type plate
of your machine. The trade names of the individual ma-
chines may vary.
1 609 929 U65 | (4.11.09)
English | 27
*
GWS 18 V-LI
Professional
3 601 J3A 3..
V= 18
-1
min 10000
mm 115
M 14
mm 22
kg 2.3