Sound Functions - Philips SBCRP420/00 Mode D'emploi

All manuals and user guides at all-guides.com
8TELETEXT FUNCTIONS
b - Teletext on/off
f - Page hold
e - Reveal/conceal
c - TV-teletext mixed
z - Actual time on screen
a - Cancel teletext picture
temporarily
h - Enlarge
õ - Memory out
ö - Enter
` - TV-mode
8 - NQ - Install
9 - † - (Video) input/output
0 - û - Personal Preference
! - miscellaneous
_ - Sleeptimer
J - OSD/ 1-12
÷ - Previous Program
- 13-24
13/24
TROUBLESHOOTING
If a fault occurs, first check the points listed below before taking the set for repair.
The remote control does not function
– Check mains power on equipment.
– The batteries may be empty or not installed.
– The TV is produced before 1980 (RC-4).
To control the matchline TXT system on older sets.
– Press and hold 'Menu' and '3' simultaneously for 6 seconds. Now you can control
teletext.
To replace the colour keys for older TV sets.
– Press and hold 'Menu' and '1' simultaneously for 6 seconds. Now the colour keys
function like those on the original remote control.
To replace all menu (cursor) functions of RC 7535
– Press and hold 'Menu' and '4' simultaneously for 6 seconds. Now you can control the
cursor keys like you were used to.
To replace all PIP functions of RC 5992, 5390, 5391, 5392 or 5393:
– Press and hold menu and '6' simultaneously for 6 seconds.
To access directly programs 11 and 12 on some older types of TV:
– Press and hold menu and '5' simultaneously for 6 seconds.
To restore all default settings,
– Press 'Menu' and '0' simultaneously for 6 seconds.
Not all functions of my original RC are present on the RP 420.
First, try the secondary functions, see: CONTROLS. If some functions are still missing, you
can program up to 4 TV functions under buttons A, B, C, D. To program the TV function you
require, keep function key A, B, C, or D pressed and enter the 3 digit code by means of the
numerical keys. Activate the programmed function by pressing A, B, C, or D together with
the sidekey.
Remark: the codes range from 000 to 127. By entering code 199 the original code is resto-
red. Codes are listed on page 22.
TELETEXT/PIP
With side button 1 pressed:
8PIP (PICTURE IN PICTURE)
FUNCTIONS
n - PIP on/off
o - PIP shift
r - PIP freeze
p - PIP swap
q - PIP select
t - Multi-picture display

8 SOUND FUNCTIONS

4 - First or second language
> - Spatial sound effect
I - Speech/Music
∞ - Crispener
ADDITIONAL
With side button 1 pressed:
9 - † 2 - (Video) input/output 2
0 - · - Automatic search tuning
! - miscellaneous - Programmable:
A - PIP step up
B - PIP step down
C - Movie expand
D - DNR
English
A -
B -
C -
D -
5