cHARGInG BAttERy
1
Plug in the power adaptor to a wall
socket. The status
caution! Make sure the appliance is
switched off and completely assem-
bled.
SuctIon HEAD
1
To attach the suction head
onto the suction nozzle 2.
SuctIon noZZLE
1
To remove the suction nozzle 2, press
the suction nozzle release buttons
and pull it off the motor housing 10.
SuRFAcE cLEAnInG
1
Apply some cleaning detergent to the
surface by use of the spray bottle 12.
3
Press the on / off
the window cleaner and clean the sur-
face from top to bottom. Apply some
pressure, if required.
PE-28FR_Fensterreiniger_Content_V1.0_14-12-05.indd 69
LED 5
lights red.
1
click it
3
button 4
to switch on
2
Plug the power adaptor into the appli-
ance. If the status
unplug the power adaptor from the ap-
pliance and the socket.
2
To remove the suction head 1, press
the suction head release
pull it off the suction nuzzle 2.
2
To remove the dirt water tank 8, pull it
out of the motor housing 10.
Reassemble in reverse order.
2
Wipe the surface thoroughly by use of
the microfibre cloth 13.
4
If the water level has reached the MAX
marking 9, switch off the appliance.
Drain the dirt water tank
the dirt water cap 7. Close it to continue
working.
LED 5
turns green,
button 6
and
8
by pulling
EN
69
29.04.15 15:59