Setting The Speed - Domo DO153A Mode D'emploi

SETTING THE SPEED

The air cooler has three speeds:
· Low
· Medium
· High
Press this button step-by-step to change the speed.
MODE
The air cooler has three different programmes:
· Normal: the fan will run at the selected speed (low, medium or high).
· Breeze: the fan will automatically change speed randomly to resemble a natural
flow of air. The fan will alternate the various speeds to imitate a natural and
comfortable sea breeze. It is also possible to select a high, medium or low speed
cycle in the natural mode. In other words, a strong, medium or soft sea breeze.
· Sleep: the sleep mode also imitates a breeze (as in the natural mode), but the
strength of the breeze will diminish every half hour. The sleep mode is best when
combined with the timer function, so that the device switches off once the set time
has elapsed.
Press this button step-by-step to change the mode.
VAPORIZER/COOLER
The air cooler can also be used as a vaporizer. This
is recommended if your house has very dry air. This
function can be switched on by pressing this button on
the control panel (or the remote control).
The water level in the water reservoir must be between
the minimum and maximum level. The water level can be
viewed by means of the water level indicator on the front
of the device. The cooling elements must be frozen first
for placing them in the compartments provided.
Water level alarm
When the water reservoir is emptied during this function, an alarm signal will sound 3 times.
Then the water pump will switch off automatically. This is to protect the pump. The device will
then continue to work as a fan.
To switch off the device, press the on/off button once again.
28
DO153A