Environmental Concerns - KÜPPERBUSCH IKE257-7-2T Notice D'utilisation

Insert the small square (Hb) into guide
(Ha).
Put together the appliance door and
the furniture door and mark the holes.
8 mm
Hb
11. Remove the brackets and mark a dis-
tance of 8 mm from the outer edge of
the door where the nail must be fitted
(K).
8 mm
12. Place the small square on the guide
again and fix it with the screws sup-
plied.
Align the kitchen furniture door and the
appliance door by adjusting the part
Hb.

Environmental concerns

The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
Ha
K
Ha
Hb
13. Press the part Hd on the part Hb.
Hb
Hd
Do a final check to make sure that:
• All screws are tightened.
• The magnetic sealing strip is attached
tightly to the cabinet.
Important! If the ambient temperature is
low (for example, in the Winter), the size of
the gasket decreases. The size of the
gasket increases when the ambient
temperature increases.
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
27