Instruction For Use - Wiha SPEEDE Guide Rapide

INSTRUCTION FOR USE

25
Fitting/replacing the battery
Open the end cap by twisting in an anti-clockwise
8
direction. To change the battery, remove the empty battery
from the screwdriver handle
7
charged battery into the screwdriver handle
7
the battery pole terminals are in the right position („-" in
7
the end cap ). Replace the end cap
8
turning it in a clockwise direction.
Select start and direction of rotation
Twist the ring switch
5
screw-driving. The direction of drive is determined by
the direction that the ring switch is turned (clockwise/
anti-clockwise).
If the ring switch 5 is released, it automatically returns to
its home position and the screwdriver stops rotating.
The speedE can then be used as a normal screwdriver.
Note: There is only one rotation speed, which provides a
max. of 0.4 Nm to assist with screw fastening. The user can
apply higher fastening force manually if required. The user
can combine activated drive and manual fastening.
. Then insert the
6
6
on the speedE,
8
to start the automatic assisted
. Ensure