Sevengo™ Clip (Optional); Field Carry Case (Optional) - Mettler Toledo SevenGo pro SG7 Mode D'emploi

Installation
3.3 SevenGo™ clip (optional)
The SevenGo™ Clip (51302325) is an electrode holder that can be placed next to the display on either side
of the housing. To mount the clip, remove the cover over the clip's fixing point using your thumbnail. Then
attach the clip by pressing it into the recess. Slide the shaft of the sensor into the clip from top. You can switch
between the storage and working positions by rotating the sensor around the clip's axis.
3.4

Field carry case (optional)

The field carry case (51302330) is not just a device for transporting your measuring equipment, it is also
ideal for use as a portable workbench. The four circular holes behind the cutout for the meter are designed
to hold the bottles containing your samples or the buffer sachets. The meter can be placed in the carry case
during the measurement. The special electrode arm leaves your hands free during the measurement.
You can adjust the length of the belt by moving the position of the buckle. This allows you to use the belt as
a handle or as a shoulder strap.
The field accessory kit (51302360) with its electrode arm, electrode clip, protective cover and wrist strap
completes your equipment. It allows you to make full use of the different possibilities offered by the system
and facilitates operation.
6 METTLER TOLEDO SevenGo pro™ conductivity