Maintenance; Replacing The Battery Of The Receiver; Cleaning The Instrument; End Of Life - HT HT38 Manuel D'utilisation

7 MAINTENANCE

 Only expert and trained technicians should perform maintenance
operations. Before carrying out maintenance operations, disconnect all
cables from the input terminals.
 Do not use the instrument in environments with high humidity levels or
high temperatures.
 In case the receiver is not to be used for a long time, remove the battery
to avoid liquid leaks that could damage the instrument's internal circuits.
7.1

REPLACING THE BATTERY OF THE RECEIVER

When the green LED turns on intermittently, and the receiver sounds continuously, it is
necessary to replace the battery.
1. Switch off the receiver by pressing and holding the
2. Open the battery compartment cover by pressing it outwards.
3. Remove the battery and insert a new battery of the same type (see § 8), respecting the
indicated polarity.
4. Restore the battery compartment cover to its position.
5. Do not scatter old batteries into the environment. Use the relevant containers for
disposal.
7.2

CLEANING THE INSTRUMENT

Use a soft and dry cloth to clean the instrument. Never use wet cloths, solvents, water, etc.
7.3

END OF LIFE

CAUTION: the symbol on the instrument indicates that the appliance and its
accessories must be collected separately and correctly disposed of.
CAUTION
/Reset key.
EN - 8
HT38