Technical Data - Zenoah GZ4350 Manuel D'utilisation

To prepare your product for long-term
storage
1. Empty the fuel tank and chain oil tank in a well
ventilated area.
2. Store the fuel in approved cans in a safe place.
3. When using vegetable based saw chain oil,
dismantle and clean the saw chain and the groove in
the bar.
CAUTION: If you do not dismantle and
clean the saw chain and the groove in

Technical data

Engine
Cylinder displacement, cm
Cylinder bore, mm
Stroke, mm
Idle speed, rpm
Power, kW/hp @ rpm
1
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Fuel tank capacity, litre/cm
Oil pump capacity at 9,000 rpm, ml/min
Oil tank capacity, litre/cm
Type of oil pump
Weight
Chainsaw without guide bar, saw chain and with empty
tanks, kg
2
Noise emissions
Sound power level, measured dB(A)
Sound power level, guaranteed L
1
Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.
2
Noise emissions in the environment measured as sound power (L
2000/14/EC.
320 - 005 - 27.09.2017
Technical data
3
3
3
dB(A)
WA
the bar, there is a risk of the saw chain
oil oxidizing. This causes the saw chain
to get stiff and the bar tip sprocket to
become jammed.
4. Fit the guide bar cover.
5. Clean the product. See instructions under
Maintenance schedule on page 37 .
6. Make sure that a complete service is carried out.
GZ4350
43,1
42
31,1
2700
2,2/3,0 @ 9600
NGK CMR7H
0,65
0,42/420
3-13
0,27/270
Adjustable
4,5
112
113
) in conformity with EC directive
WA
39