Transport, Storage And Disposal; 10.1 Venting The Appliance; 10.2 Transporting The Appliance - Melitta Passione OT Mode D'emploi

Transport, storage and disposal

10 Transport, storage and disposal

10.1 Venting the appliance

We recommend venting the appliance when it is not used for a long period,
prior to transport and when there is a risk of frost.
During venting, residual water is removed from the appliance.
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
3. Navigate to the System > Venting menu.
4. Select Start using the arrow buttons and confirm with "menu/ok".
5. Follow the further instructions on the display.
» The appliance switches off.

10.2 Transporting the appliance

ATTENTION
Freezing residual water can damage the appliance.
Prevent the appliance from being exposed to temperatures below 0 °C.
ƒ
Information
Transport the appliance in the original packaging. This avoids damage in
transit.
Before transporting the appliance, carry out the following activities:
1. Vent the appliance (see section 10.1 Venting the appliance on page 88).
2. Empty the drip tray and the coffee grounds container.
3. Empty the water tank.
4. Empty the bean container.
5. Clean the appliance (see section 8.1 General cleaning on page 78).
6. Secure loose parts (cup plate, etc.) with suitable adhesive tape.
7. Package the appliance.
88