Pin Configuration Of The Wt 210 / Wt 210 Ble; Recommended Power Supply - Häfele WT 210 Instructions De Montage Et De Maintenance

5.2 Pin configuration
of the WT 210 /
WT 210 BLE
5.3 Recommended
power supply
Installation version 2 (additional security requirements - not verified by UL)
• A door with a WT 210 / WT 210 BLE, an electric opening device, an internal
door opener push button and a WTX 202.
See chapter "5.4.2 Installation version 2 (additional security requirements / not
verified by UL)" on page 35.
NOTE
Risk of damage to property or consequential damage due to incorrect
installation!
The WT 210 / WT 210 BLE can be damaged if it is installed incorrectly.
• A switch/button is connected between IN+ and IN-.
Fig. 3: Pin configuration WT 210 / WT 210 BLE
Connection
+/-
A, B
ALARM
IN+, IN-
NC, NO, COM
Fig. 4: Power supply
• Input voltage: 100 – 240 V AC
• Output voltage: 12 V DC
Usage
Connection of the power supply 12 – 24 V DC
Connection of the RS 485
Alarm output port
Switching input/push button input
Relay output port, changeover contact
33