Turning On And Off - Favero Electronics INOUT-1s Mode D'emploi Et D'installation

ENGLISH
1.7. Disposal of product
L
Please dispose of your product in a manner most compatible with the environment and in accordance
with federal or state laws, reusing parts and recycling components and materials when possible.
When this crossed-out waste bin symbol is attached to a product it signifies the product
should be disposed of in a separate container from other waste.
The sorted waste collection of the present device is organized and managed by the
manufacturer. Users who wish to dispose of their present device should contact the
manufacturer and follow the procedure indicated for separate waste collection.
Ensuring proper sorted waste collection, in accordance with environmental standards, for the
disposal of further devices helps to protect the environment and the health of persons from
any damaging effects. It also favors the reuse and recycling of materials.
Administrative sanctions, in accordance with regulations in effect, will be applied for any
improper or abusive disposal of the product on part of the holder.
1.8. Compliance with EU regulations
The product meets the essential requirements of the Electromagnetic Compatibility and Safety for
electronic devices, in accordance with European directives:
• 2014/30/EU of 26 February 2014,
2014/35/EU of 26 February 2014,
•
2011/65/EU of 8 June 2011.
•
2. Operation

2.1. Turning on and off

To turn on the INOUT, press the [ON OFF] key or any other key.
To turn off the INOUT, press the [ON OFF] key; deactivation will nonetheless occur automatically 30
seconds after the last key has been pressed.
2.2. Substitution of a player
To set the number of the player who is about to enter, press the [IN] key followed by the desired number
(keys from [0] to [9]).
To set the number of the player who is about to exit, press the [OUT] key followed by the desired number
(keys [0] to [9]).
To display the programmed numbers, press and hold down the [SHOW] key.
2.3. Recovery time
To set the recovery time press the [F1] key followed by the keys from [0] to [9].
The recovery time is displayed on the red digits by default. Press the [F1] key several times to select
whether to display the recovery time on the red digits or on the green digits.
6
/ 24
R
00292-M01-ML - INOUT-1s2s User Manual Rev01 - 151105 -
FAV E RO E L EC T RO NIC S