Burners Technical Data Table; Rules For Converting And Installing For Other Types Of Gas; Substituting The Nozzle In The Main Burner; Substituting The Nozzle In The Pilot Burner - Lotus cookers CP-74G Instructions Pour L'installation Et L'emploi

Mod. CP-74G
Burner 9.5 kW
Burner Injector 1/100 mm
Min. output adjustment 1/100 mm
Pilot Injector
Consumption
Mod. CP-78G
2 Burners 9,5 kW
Burner Injector 1/100 mm
Min. output adjustment 1/100 mm
Pilot Injector
Consumption
Mod. CP-76G
Burner 13,95 kW
Burner Injector 1/100 mm
Min. output adjustment 1/100 mm
Pilot Injector
Consumption
CPT-74G
Burner 6 kW min. 2,75 kW
Burner Injector 1/100 mm
Min. output adjustment 1/100 mm
Pilot Injector
Consumption
Primary air h=mm
CPT-76G
Burner 9 kW min. 3,7 kW
Burner Injector 1/100 mm
Min. output adjustment 1/100 mm
Pilot Injector
Consumption
Primary air h=mm

RULES FOR CONVERTING AND INSTALLING FOR OTHER TYPES OF GAS

Our appliances are tested and regulated for liquid gas (see plate inside).
The conversion or adaptation to another type of gas must be carried out by a specialised technician. The nozzles for the
various types of gas are in a bag supplied with the appliance and marked in hundredths of mm (see the "Technical Data"
table).

SUBSTITUTING THE NOZZLE IN THE MAIN BURNER

• In order to operate inside the appliance, it is necessary to empty the water tub.
• Remove the small knob from the panel by unscrewing it.
• Remove the front fixing screws from the panel, remove the start up cable from the piezoelectric ignition device.
• Using a suitable spanner, unscrew the nozzle and substitute it with the right one (see the "Technical Data" table).
• The main burner does not require any regulation of the primary air.

SUBSTITUTING THE NOZZLE IN THE PILOT BURNER

The flame of the pilot burner has fixed air.
The only operation necessary is the substitution of the nozzle according to the type of gas.
It is therefore necessary to unscrew the screws as specified in the previous point; with a suitable spanner unscrew the
fitting and substitute the nozzle with a suitable one. With the right nozzle, the flame must lap the thermocouple.
GB

BURNERS TECHNICAL DATA TABLE

12.68 kWh/KG
G30
BUTANE
30 mbar
160
100
25
kg/h 0,749
2x160
100
25
kg/h 1,498
2x130
130
25
kg/h 1,100
125
75
27
kg/h 0,473
15
150
85
27
kg/h 0,710
20
42
IE
12.87 kWh/KG 9.45 kWh/m
G31 G20
PROPANE NATURAL GAS
37 mbar 20 mbar
160
100
25
kg/h 0,738
2x160
100
25
kg/h 1,476
2x130
130
25
kg/h 1,084
125
75
27
kg/h 0,466
15
150
85
27
kg/h 0,699
20
3
st.
P
P
235
adjustable
41
3
1.005 m st./h
P
P
2x235
adjustable
41
3
2.010 m st./h
P P
2x205
adjustable
41
m³st./h 1,476
185
adjustable
35
m³ st./h 0,635
15
230
adjustable
35
m³ st./h 0,952
15