Declaration Of Compliance; Installing The Appliance; Gas Technical Data Table; Electrical Technical Data Table - Lotus cookers CP-74G Instructions Pour L'installation Et L'emploi

Marmite a nuoilles usage professionnel

Table des Matières

Les langues disponibles

The manufacturer declares that the appliances are compliant with the prescriptions of the EEC norm 2009/142. The

installation must be done observing the norms in force particularly concerning room ventilation and discharging gas

emissions.

N.B.: The manufacturer declines any responsibility for direct or indirect damage caused by improper or incorrect

installation, alterations, maintenance or use of the appliance, as in all the other cases considered in the items of our sales

conditions.

•

The operations for installing, conversions for use with other types of gas and starting up must be done only by

qualified personnel whose qualifications comply with the norms in force.

•

Gas installations, the electrical connections and the rooms in which the appliances are installed must comply with

the norms in force in the Country in which the installation is effected; above all, the appliance must be installed in

a well ventilated room, preferably under an extractor hood, so as to ensure the complete extraction of gas emissions

which are formed during combustion. The air necessary for combustion is 2m3 /h per kW of power installed.

During installation it is necessary to observe a maximum distance between the front edge of the supporting cabinet and

the appliance. (See drawing at item "emptying the water tub")

MODEL

DIMENSIONS

NOMINAL HEAT OUTPUT (kW)

GAS CONNECTION ISO R7

WATER FILLING

WATER DRAINAGE

MODEL

CP-74G

CP-76G

CP-78G

CPA-74G

CPA-76G

CPA-78G

Make sure that the air intake into the room where the appliance is installed is sufficient for an adequate change of air, as

specified by regulations in effect.

The appliances installed in buildings open to the public must satisfy the following requirements.

Installation rules

The installation and maintenance of the appliance must be done according to the correct procedures and regulation

texts in use, particularly:

• safety standards for the prevention of fire and panic.

Connection and installation of appliance, ventilation and exhaust removal systems, shall be done according to the

Manufacturer's instructions and by qualified technicians and according to the regulations in effect. The electric wiring

shall conform to the regulations in effect. All fire prevention codes shall be observed.

a) General indications (Rules valid for GB only)

- For all appliances:

Gas safety Regulations, 1984; Health and safety at Work Act, 1974 Codes of Practice, BS 8173, 1982, The Building

Regulations 1985; The Building Standards Regulations, 1981, the IEE Regulations and the by-laws of the local Water

Undertaking.

The local gas Region or LPG supplier and the local authority and the relevant recommendation of the British Standards

(latest editions) concerned.

The installation, transformation and repair of appliances for professional kitchens as well as removal due to

malfunction,

and the supply of gas, may be made only by means of a maintenance contract stipulated with an authorised sales office