Problem Chart; Cleaning And Maintenance; Technical Specifications - EuroLite CLX-16 Mode D'emploi

6.13 Kill-function
Via the Kill-function, you can set only the desired channels to 100 % in a running chaser. All other channels
remain off, the chaser keeps running internally.
Call up the desired chaser. Press the Kill-button and the Kill-LED shines. Press the desired Flash-button(s)
of the desired channel(s).

7. PROBLEM CHART

PROBLEM
No power.
No signal output.

8. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.

9. TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Number of control-channels:
Integrated programs:
Sound-control:
Audio-input:
Audio-sensitivity:
DMX 512-output:
imensions (LxWxH):
Weight:
Please note: Every information is subject to change without prior notice. 23.09.2004 ©
CAUSE
The power unit is not connected.
Blackout-mode activated.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
230 V AC, 50 Hz ~
via 12-20 V DC, 250 mA power unit included in the delivery
5 W
16
30
via built-in microphone or via audio-input
RCA
0.1 - 1 V
3-pin XLR-connector with polarity selector
320 x 180 x 80 mm
2 kg
Check the connection cable of the
power unit and any extension-cables.
Switch off blackout by pressing the
Standby-button.
20/34
REMEDY
70064650_V_1_2.DOC