NORAUTO HT7101 Mode D'emploi page 120

- Before making any electrical connection,
check that:
4The appliance and its components are not
damaged. In which case, do not use the
appliance but bring it back to your reseller
for inspection and fixing.
4The indicated voltage on the rating label
matches with your electrical installations.
- Position the battery charger as far away
from the battery as the leads will allow.
- Explosive gases may collect near the ground.
Locate the battery charger as high as
possible above ground level.
- Do not proceed to any maintenance
o p e r a t i o n b y y o u r s e l f . A n y c h e c k ,
disassembling or fixing has to be performed
exclusively by a qualified person.
- Do not open body casing. There are no user-
serviceable parts inside.
- Do not place the battery charger above
or stand the battery charger on top of the
battery.
- The battery terminal not connected to the
chassis has to be connected first. The other
connection is to be made to the chassis,
remote from the battery and fuel line. The
battery charger is then to be connected to
the supply mains. After charging, disconnect
the battery charger from the supply mains.
Then remove the chassis connection and
then the battery connection.
120