Before Initial Use - Dometic FreshLight 1600 Notice D'utilisation

Before initial use

8 Before initial use
Inspection before starting up
Before you switch on the roof air conditioner, observe the following:
➤ Check whether the supply voltage and frequency correspond to the
values specified in the technical data, see page 66.
➤ Ensure both the air intake opening and the air nozzles are free. All
ventilation grilles must always be kept free to ensure that the roof air
conditioner is able to operate at maximum capacity.
!
CAUTION! Beware of injury
Do not insert your fingers or objects into the air nozzles or the
intake grille.
Check remote control and insert batteries
➤ Insert the provided batteries in the remote control battery compartment,
see "Replacing the remote control batteries" on page 59.
➤ Check that the four Dip switches (fig. 4, page 3) are in the correct
position.
➤ If you changed the position of the Dip switches: Acknowledge the new
setting using the Reset button (fig. 3 10
Setting the time
➤ Set the current time: see "Setting the time" on page 60.
50
Dometic FreshLight
page 3).
,
EN