Midland H7+ UHD Manuel De L'utilisateur page 7

4.6 Charging the camera
Before using the H7+ for the first time, please fully charge the bat-
tery first.
• Connect the camera to the charger via USB cable. The red indi-
cator will be on, charging is in process.
• When the battery is fully charged, the red indicator will turn off. It
takes around 3.5 hours to fully charge the battery.
Some functions, such as the WiFi function, cannot be used if battery
is going to be low.
4.7 Insert the TF Card
• Insert a Micro SD card into the card slot according to the direc-
tion shown on the camera.
• Unit supports Micro SD card up to 32 GB.
Note:
a. We suggest using ≥CLASS 10 (High speed) Micro SD card for
smoothly shooting purpose. Lower CLASS of Micro SD Card
may cause video jammed.
b. There is only one correct direction to insert the Micro SD card
into the slot. Do not force the card into the card slot, as it may
damage both the camera and the Micro SD card.
c. A new Micro SD card should be formatted with the camera be-
fore using.
4.8 How to use the waterproof case
The camera can support underwater 30meters if mounted in the
waterproof case.
• Ensure the case is dry and clean
• Open the waterproof case latch.
• Insert the camera properly.
• Close the waterproof case buckle.
• After the use, please carefully clean the case with clean water and
dry with a soft cloth.
7