Emission Levels; Intended Use - Festool ISC 240 Li Mode D'emploi Original

English
Wear a P2 respiratory mask to pro­
tect your health.
– Always connect the machine to a dust ex­
tractor when performing work that gener­
ates dust.
Do not use power supply units or third-
–
party battery packs to operate cordless
power tools. Do not use third-party charg­
ers to charge the battery packs. The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
2.3

Emission levels

The levels determined in accordance with EN
62841 are typically:
Sound pressure level
Sound power level
Uncertainty
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
three directions) and uncertainty K measured in
accordance with EN 62841:
240 mm
Main handle
a = 2.5 m/s
h
Auxiliary
a
h
handle
Uncertainty
K = 2 m/s
240 mm
Main handle
a = 4.5 m/s
h
Auxiliary
a = 7.5 m/s
h
handle
Uncertainty
K = 2 m/s
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
16
L = 86 dB(A)
PA
L = 97 dB(A)
WA
K = 5 dB
(vector sum for
h
Flexible mineral wool
350 mm
2 a = 2.5 m/s
h
= 4 m/s 2 a = 4.5 m/s
h
2 K = 2 m/s
PUR
350 mm
2 a = 8.5 m/s
h
2 a = 14 m/s
h
2 K = 5 m/s
– They represent the primary applications of
the power tool.
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
3

Intended use

The cordless insulating-material saw is de­
signed to saw flexible insulating materials
made of mineral wool (glass or stone wool) or
natural fibres (e.g. wood or hemp fibres) as well
as to saw insulating materials made of PUR/PIR
(polyurethane hard foam), polystyrene or pres­
sure-resistant mineral wool.
In accordance with the intended use, only insu­
lating materials with the following raw densi­
ties may be machined:
Flexible natural fibres
Flexible mineral wool
Pressure-resistant mineral
wool
PUR/PIR
Polystyrene
2
The cordless insulating-material saw is not
2
suitable for sawing chipboard, metal, wood or
pressure-resistant insulating materials made
of natural fibres.
2
This power tool may only be used by experts or
instructed persons.
Only saw insulating materials with the cutting
set intended for this purpose, see section 6.2.
2
The user is liable for damage and acci­
dents caused by improper and non-inten­
2
ded use.
– intended for use with BP Festool battery
2
packs of the same voltage class.
CAUTION
< 90 kg/m³
< 100 kg/m³
100–170 kg/m³
< 36 kg/m³
< 45 kg/m³