Safety Warnings - Festool ISC 240 Li Mode D'emploi Original

Contents
1 Symbols..................................................... 15

2 Safety warnings.........................................15

3 Intended use..............................................16
4 Technical data........................................... 17
5 Parts of the machine.................................17
6 Commissioning..........................................17
7 Battery pack.............................................. 18
8 Settings......................................................18
9 Working with the machine........................ 20
10 Service and maintenance..........................20
11 Accessories............................................... 21
12 Environment.............................................. 21
13 General information.................................. 21
1 Symbols
Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Inserting the battery pack
Removing the battery pack
Do not dispose of it with domestic
waste.
Tip or advice
Handling instruction
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
2 Safety warnings
2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Follow the operating manual for the charger
and the battery pack.
2.2 Machine-related safety instructions
Hold the power tool by insulated gripping
-
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Autting accessory contact­
ing a "live" wire may make exposed metal
parts of the power tool "live" and could give
the operator an electric shock.
Use clamps or another practical way to se­
-
cure and support the workpiece to a stable
platform. Holding the workpiece by hand or
against your body leaves it unstable and
may lead to loss of control.
- Wait until the power tool has come to a
complete halt before placing it down. The
insertion tool can get caught and lead to a
loss of control of the power tool.
- Do not use deformed or cracked saw
blades or cutting sets or saw blades with
blunt or broken cutting edges.
- The saw blade on the power tool must al­
ways be running when it makes contact
with the workpiece.
-
Wear suitable personal protective equip­
ment: ear protection, safety goggles, a dust
mask for work which generates dust, and
protective gloves when working with raw
materials and when changing tools.
- Hazardous/toxic dust may be produced
during work (e.g. wood dust or mineral
wool dust). Contact with or inhalation of
this dust may pose a risk for the operating
personnel or persons in the vicinity. Com­
ply with the safety regulations that apply in
your country.
English
15