Securing The Mounting Braket On The Wall - Atlantic ACCESSIO DIGITAL 2 Notice D'utilisation Et D'installation

SECURING THE MOUNTING BRAKET ON THE WALL

1
Put the mounting bracket on the floor and against the wall.
Locate the drilling points A. They will indicate the position of the
2
lower brackets.
3 Move the mounting bracket up to the previously identified
holes to point to the remaining two drilling points B. These will
indicate the position of the upper brackets.
4 Drill the 4 holes and insert the pegs adapted to your wall
(e.g.:plasterboard, concrete)..
5
Position the mounting bracket and tighten.
1
Drilling
Points A
2
28
Drilling
Points B
Drilling
Points A
3