Specifications
ENGINES
Model
Displacement
Electrical System
Oil Capacity
Model
Displacement
Electrical System
Oil Capacity
All Models
Spark Plug Gap
Spark Plug Torque
CHASSIS
Fuel Tank Capacity
Front Wheels
Rear Wheels
Power Ratings
The gross power rating for individual gasoline engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 Small Engine Power & Torque Rating Procedure, and is rated in accordance with SAE J1995.
Torque values are derived at 2600 RPM for those engines with "rpm" called out on the label and 3060 RPM for all others;
horsepower values are derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.
COM. Net power values are taken with exhaust and air cleaner installed whereas gross power values are collected without
these attachments. Actual gross engine power will be higher than net engine power and is affected by, among other things,
ambient operating conditions and engine-to-engine variability. Given the wide array of products on which engines are
placed, the gasoline engine may not develop the rated gross power when used in a given piece of power equipment. This
difference is due to a variety of factors including, but not limited to, the variety of engine components (air cleaner, exhaust,
charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity,
altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute
an engine of higher rated power for this engine.
Parts and Accessories
Contact an authorized dealer.
26
7220 Series Intek
TM
656 cc (40,03 cu in.)
Battery: 12 Volt, 195 CCA
Alternator: 9 amp reg.
1,9 L (64 oz)
Professional Series
8270
TM
724 cc (44,18 cu in.)
Battery: 12 Volt, 195 CCA
Alternator: 9 amp reg.
1,9 L (64 oz)
0,76 mm (0.030 in.)
20 Nm (180 in-lbs)
11,25 L (2,97 gal)
Tire Size: 15 x 6.0
Inflation Pressure: 14 psi (0,96 bar)
Tire Size: 20 x 10
Inflation Pressure: 10 psi (0,68 bar)
Tire Size: 22 x 9,5
Inflation Pressure: 10 psi (0,68 bar)
TRANSMISSION
Type
Engine Oil
MOWER
Width of Cut
Number of Blades
Base Deck Platform
Cutting Height
Cutting Positions
®
Tuff Torq
-46
10W-30 Premium Engine Oil
96,5 cm (38")
106,7 cm (42")
2
Rear Discharge
3,8-8,9 cm (1,5-3,5")
6