Important Safety Warnings - Eaton Tripp-Lite SmartOnline Série Manuel De L'utilisateur

Important Safety Warnings

SAVE THESE INSTRUCTIONS. This manual contains important instructions and warnings that should be followed during the installation and
maintenance of Tripp Lite SmartOnline transformer modules.
Transformer Location Warnings
• Install your transformer module indoors, away from excess moisture or heat, direct sunlight, dust or conductive contaminants.
• Install your transformer module in a structurally sound area. Your transformer is heavy; exercise care when moving or lifting the unit.
• Only operate your transformer module at indoor temperatures between 32° F and 104° F (0° C and 40° C). For best results, maintain
indoor temperatures between 62° F and 84° F (17° C and 29° C).
• For proper ventilation, leave adequate space around all sides of the transformer module.
• Do not install the transformer module near magnetic storage media, as this may cause data corruption.
Equipment Connection Warnings
• Connect your transformer module's grounding terminal to a grounding electrode conductor.
• Branch circuit protection must be provided by building installation.
Maintenance Warnings
• Your transformer module does not require routine maintenance. Do not open it for routine maintenance. There are no user-
serviceable parts inside.
Medical Applications and Life Support Warning
• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of
the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the
presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
2