Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

36
www.aeg.com
1. Open the lid (C).
2. Fill the dispenser (B) until the rinse
aid reaches the marking ''MAX''.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the lid
locks into position.

9. DAILY USE

1. Open the water tap.
2. Press the on/off button to activate
the appliance.
• If the display shows the salt
refilling message, fill the salt
container.
• If the display shows the rinse aid
refilling message, fill the rinse aid
dispenser.
3. Load the baskets.
4. Add the detergent. If you use multi-
tablets, activate the option Multitab.
5. Set and start the correct programme
for the type of load and the degree
of soil.
9.1 Using the detergent
A
CAUTION!
Only use rinse aid
specifically designed for
dishwashers.
B
C
Fill the rinse aid dispenser
when the indicator (A)
becomes clear.
When the rinse aid
dispenser needs refilling, the
display shows a message.
CAUTION!
Only use detergent
specifically designed for
dishwashers.
1. Press the release button (A) to open
the lid (C).
2. Put the detergent, in powder or
tablets, in the compartment (B).
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
9.2 Setting and starting a
programme
The Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
Starting a programme
When you activate the appliance, the
display shows the programme list. The

Publicité

Table des Matières
loading

Table des Matières