Usage; Starting Use - Beurer SL 10 DreamLight Mode D'emploi

Selecting automatic switch-off
The device has an automatic switch-off function. After the set period elapses, the
light on the sleep aid automatically switches off.
Use the automatic switch-off controller (located on the back
of the sleep aid) to select your preferred session length (8 or
20 minutes).

8. Usage

Starting use

1. Place the sleep aid in the stand.
2. Position the stand within arm's reach on a raised surface (such as your bed-
side table).
3. Darken the room.
4. To switch the sleep aid on, touch the touch-button
illuminates in red. You can choose between a red or a blue light.
Press 1x
Press 2x
The light illuminates in red
The light illuminates in blue
34
. The sleep aid's light