Environmental Protection; Minimising Wear And Preventing Damage; Standard Spare Parts - Viking ME 545 Manuel D'utilisation

Environmental protection

Lawn cuttings
should be
composted and not
disposed of in
household waste.
The appliance, its packaging
and accessories are all
produced from recyclable
materials and must be
disposed of accordingly.
By disposing of materials
separately, and in an
environmentally-friendly
manner, valuable resources
can be re-used. For this
reason, the appliance should
be disposed of for recycling
after completion of its useful
life.

Standard spare parts

Mowing blade
6340 702 0100
NOTE
The fastening elements of
the mowing blade (e.g.
blade fastening screw, lock
washer) must be replaced
when replacing the blade or
when installing the blade.
Spare parts are available
from a VIKING specialist
dealer.
0478 121 9909 E - EN
Minimising wear and
preventing damage
Important information on
maintenance and care of the
product group
Electric lawn mowers
Please always observe the
following important information
for the prevention of damage
or excessive wear to your
VIKING appliance:
1. Wearing parts
Some parts of the VIKING
appliance are subject to
normal wear even when used
properly and must be replaced
in due time depending on type
and duration of use.
These include:
- Blade
- Grass catcher bag
- Protection bumpers
- V-belt (ME 545 V)
2. Observance of the
information in this
instruction manual
The VIKING appliance must
be used, maintained and
stored with the care described
in this instruction manual. Any
damage caused by non-
observance of the safety,
operating and maintenance
instructions is the sole
responsibility of the user.
This applies in particular to:
- inadequately dimensioned
power cords (cross section)
- incorrect electrical
connection (voltage)
- product modifications not
approved by VIKING
- the use of tools or
accessories which are not
approved or suitable for the
appliance, or are of inferior
quality.
- improper use of the product
- use of the product for
sporting or competitive
events
- resultant damage due to
continued use of the
product with defective
components
3. Maintenance operations
All work listed in the section
"Maintenance" must be
performed regularly. If these
maintenance operations
cannot be carried out by the
user himself, a specialist
dealer must be commissioned
to do it.
VIKING recommends that you
have maintenance operations
and repairs performed
exclusively by a VIKING
specialist dealer.
VIKING specialist dealers
regularly attend training
courses and are provided with
technical information.
If these operations are
neglected, faults may arise
which are the responsibility of
the user.
These include:
- damage to the drive motor
as a result of inadequate
cleaning of the cooling air
guide (inlet slots)
- corrosive and other
resultant damage caused
by incorrect storage
- damage to the appliance
through the use of inferior-
quality spare parts.
- damage due to untimely or
inadequate maintenance or
damage due to
maintenance or repair work
not performed in the
workshops of specialist
dealers.
15