Lowenstein Medical PrismaPSG Mode D'emploi page 31

prismaCONNECT
prisma HUB
2. Connect the other connector of the PSG connection cable up
to the module interface on the prismaCONNECT or prisma HUB
module.
3. Connect the prismaPSG module up to a PSG. There are
preconfigured connectors and a universal cable for
configuration available for this purpose.
Accessories", page
4. If necessary: Switch on the therapy device.
Result prismaPSG is connected.
4 Preparation and operation
40).
prismaPSG
(see "10.3
EN 31