Important Safety Instructions For Use Of The Electronic Sander Polisher; Replacement Parts; Polarized Plugs - Hitachi SP 18V Mode D'emploi Et Instructions De Securite

IMPORTANT SAFETY INSTRUCTIONS FOR USE OF
THE ELECTRONIC SANDER POLISHER
WARNING:
1. Keep away from a revolving sanding disc and wool bonnet.
2. Pay strict attention to sparks.
3. Use the side handle to securely grip the Sander Polisher.
4. Never use depressed center wheel as a disc grinder.
5. Do not use this machine near welding machine.
6. Do not operate on direct current.
7. Should the revolving speed suddenly decrease due to overload, leave the machine from
workpiece and turn the switch OFF and then ON again.
8. Do not push the lock pin while the spindle is running.
9. Always hold the body handle and side handle of the power tools firmly. Otherwise the
counterforce produced may result in inaccurate and even dangerous operation.

REPLACEMENT PARTS

When servicing use only identical replacement parts.
Repairs should be conducted only by a Hitachi authorized service center.

POLARIZED PLUGS

To reduce the risk of electrick shock, this equipment has a polarized plug (one blade is wider
than the other).
This plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way.
Death or serious bodily injury could result from improper or unsafe use
of the electronic sander polisher. To avoid these risks, follow these basic
safety instructions:
English
7