Use In Accordance With Regulations; Assembly/Connection - Becker Centronic UnitControl UC520 Notice De Montage Et D'utilisation

Assembly and Operating Instructions
Use in accordance with regulations
The UC520 is intended solely for the control of roller shutters, awnings and blind
systems. The control panel of the UC520 can only be operated in conjunction
with the corresponding power supply unit (UC520).
This device may only be used in connection with equipment from other manu-
facturers following consultation with your local retailer.
• Please note that radio sets cannot be operated in areas with increased risk of
interference (e.g. hospitals, airports).
• The remote control is only permitted for equipment and systems with which
a malfunction in the handheld transmitter or receiver does not present a risk
to persons, animals or objects, or this risk is covered by other safety devices.
• The operator does not enjoy any protection from disturbances by other re-
mote signalling equipment and terminal equipment (for example, also by
radio sets operated in the same frequency range in accordance with regula-
tions).
• Use radio receivers in conjunction only with devices and systems permitted
by the manufacturer.
Note
Ensure that the controls are not installed and operated in the vicinity of
metal surfaces or magnetic fields. Radio sets transmitting at the same
frequency could interfere with reception. It should be noted that the
range of the radio signal is restricted by legislation and constructional
measures.
22

Assembly/connection