Audio Pro LIVING LV1 Manuel D'utilisation page 13

MULTIROOM
VOLUME ZONES, DIFFERENT LEVELS IN DIFFERENT ROOMS
You can extend your audio network with infinate number of LV-speakers. But you might not always
want the same volume level in all your rooms. Volume zones solves this. Each channel (House
Code) can be divided in up to 3 volume zones. Each zone can have its own volume level. One
level in the livingroom, another in the kitchen. You can adjust volume on all speakers at the same
time with Master volume. You can have as many LV speakers in each zone as you like, or just one
speaker. Zone volume is adjusted by the remote control.
VOL
ZONE A
1. Each channel (House Code) can be divided in up to three zones (A, B and C).
2. In zones you can adjust volume, on/off and mute individually in each zone.
Master volume on remote will adjust volume in all zones at the same time.
3. A zone does not have to be one room, can be whole housefloor or departments (within range of transmitter).
Volume zones works with all speakers in the Living series.
Use Living LV1, LV2, LV3 and LV-SUB in same zones.
SETTING VOLUME ZONE
Reset speaker to factory settings:
ZONE B
(HOUSE CODE 1)
Zone button on the front of LV1.
One push to display current zone.
Change zone by pushing again. A, B, C and back to A.
Zone letter is displayed.
When zone is selected, display will turn black after 3 seconds.
Hold House Code button on speaker pressed while pushing VOL + button.
VOL
VOL
ZONE C