Maintenance And Use - PowerPeak FET8321P Mode D'emploi

Step 5: assembling the handlebar and computer
Attach the handlebar (3) with two allen bolts (17) and two curved washers (13).
Remove the four screws (16) from the back of the computer (1).
Connect the hand pulse cables (4) with the computer (1).
Attach the computer (1) to the mounting on the handlebar with four screws (16).
Attach the cover (7) with screws (8) and self‐tapping screws (22).
Step 6
When the installation is complete, carefully check and ensure all the screws and nuts are fastened firmly.
MAINTENANCE AND USE
• This device requires a regular check‐up to prevent physical injury. This means that bolts and nuts
should be frequently checked for cracks and sharp edges etc.
• Defective components must be replaced immediately. If this is not possible, the device must be put
out of order until the necessary repairs have been made.
• Clean only with a damp cloth, do not use solvent cleaners.
• This product is intended for use in clean, dry conditions. You should avoid storage in excessively cold
or damp places as this may lead to corrosion and other related problems.
27