Stipulated Usage; Basic Safety Principles; Power Supply Connections; Safety Precautions - Heiniger Evo 3 Mode D'emploi

1.3 Stipulated usage

The shearing plant's intended purpose of use is described in Chap-
ter 2.2, "Purpose of use" . Use for any other purposes, particularly
on people and dangerous types of animals, especially predators, is
expressly forbidden.
The shearing plant must only be used in dry areas.
The details contained in Chapter 2.3, "Technical data" , are to be consi-
dered as legally binding limit values and characteristic data.
The safety check refers only to the portable shearing plant and not to
the mechanical shaft and the shearing handpiece.

1.4 Basic safety principles

1.4.1 Power supply connections

• Never plug the equipment into damaged sockets. Observe the rele-
vant regulations applicable in your country.
• Maintenance and cleaning work must only be carried out when the
equipment is not plugged in.
• Sockets must be equipped with a circuit breaker (FI).

1.4.2 Safety precautions

• Avoid touching machinery that has come into contact with water or
other liquids.
• Never clip wet animals.
• Children are forbidden from operating the equipment.
• Lay out the power cable cleanly.
• Check the power cable occasionally for damage.
• Keep the power cable well away from machinery & equipment ope-
rating in close proximity.
• Switch off the plant before pulling out the plug.
• After use remove the plug from its socket. The plant should only be
cleaned or the cutter replaced when the plug is removed from the
power socket.
• Avoid kinks or coils in the cable. Never wind the power cable
around the plant during periods of storage. This can result in breaks
and damage to the insulation.
4 EVO Shearing Plant – Instruction Manual